| 1. | It is shown that the value of the avrami exponent n decreases because of the limited volume
结果表明，有限的体积使avrami指数n值偏小。 |
| 2. | Earth - moving machinery - laboratory evaluations of protective structures - specifications for deflection - limiting volume
土方机械.防护结构的实验室评定.挠曲极限量规范 |
| 3. | En iso 3164 earth - moving machinery . laboratory evaluations of protective structures . specification for deflection - limiting volume
土方机械.保护结构的实验室评价.偏差极限容量规范 |
| 4. | Earth - moving machinery - laboratory evaluations of protective structures - specifications for deflection - limiting volume iso 3164 : 1995 ; german version en iso 3164 : 1999
土方机械.保护结构的实验室评定.挠曲极限值规范 |
| 5. | Series a includes steam service for warming up before the main line is opened , and for balancing pressure where the lines are of limited volume
系列a包括用于在主管道开启前进行加温的蒸汽应用场合，或在流量有限的管道上平衡压力。 |
| 6. | However , with exports of 14 . 7 mn bags and domestic consumption of over 16 mn bags , only limited volumes are expected to be exported until the harvest of the new crop
14 . 7百万袋用于出口和16百万袋用于国内消费后，新豆收获之前，可供出口的数量有限。 |
| 7. | Simply state , topology optimization consists of determining the best arrangement of a limited volume of structural material within a given spatial domain so as to obtain the optimal mechanical performance of the concept design
拓扑优化是指确定结构单元、节点及内部边界的空间连接方式。其要求结构工作性态良好，结构物有较高的安全度和可靠性。 |
| 8. | Firstly , the computer simulating model of the limited volume unit is established . then pet is chosen as sample . generally , under predetermined nucleation condition , the course of pet isothermally crystallized at 170 c in limited volume unit is simulated
计算机模拟实验首先建立了有限体积元模型，然后选定了pet为样品，一般模拟其在预先成核条件下、 170时的等温结晶过程。 |
| 9. | In this paper , the course of isothermal crystallization kinetics of polymer in limited volume unit is simulated by use of the method of monte carlo . four factors influenting on the course of polymer in the limited volume unite isothermal crystallization are analyzed under the given conditions . the four factors are sample volume shrinkage , the change of the linear growth rate of entities g , the change of sample thickness and the change of the number of nuclei
本文采用montecarlo方法研究了高聚物在有限体积元中的等温结晶动力学过程，分析了在一定条件下，样品体积收缩、晶体线生长速率变化、样品厚度变化和晶核数目变化这四种因素对高聚物在有限体积元中的等温结晶过程的影响。 |
